A Technician Beside the Tunnel All Day
Our technician watches the sensor, resets the sequence when needed and can stop the laser at once. The tunnel never runs without someone from our team nearby.
Walk-Through Entrances · Dubai & GCC
Lazulite rents the Laser Curtain Tunnel, a walk-through entrance with a sensor at its mouth. As a guest steps up, the sensor fires a laser curtain and the LED tubes along the frame come alive. Our technician installs, programmes and runs it at indoor events, stands and activations across the GCC.
Arrival
TubesStand frontQuick facts
A laser curtain tunnel is a short walk-through structure that senses an approaching person and answers with a sheet of laser light and lit LED tubes. Each guest sets off the effect by entering.
20+
Laser Tunnel Entrances Built
35,000+
Guests Walked Through
50+
Light and Laser Sequences Programmed
12+
GCC Venues Fitted
Every booking includes the tunnel structure, its LED tubes, the laser and sensor kit, and the control system. We deliver, build, programme and remove it. One of our technicians stays with the tunnel while guests pass through.
A sensor at the entrance watches for anyone approaching. When a guest enters its range, it signals the controller, which starts the curtain and the tube sequence together. The effect resets once the passage clears, ready for the next arrival.
The frame carries LED tubes 1,000 mm long, each listed at a resolution of 64. Lighting and data travel over LAN. The laser takes its cues over ILDA, the laser show link, or DMX from a lighting desk.
Tell us your brand colours and the feeling of the entrance: calm, bright or fast. Our programmers build tube chases and curtain looks to match, then send a preview clip. You sign off the sequence before it is loaded.
Choose a configuration
Brand Activation Entrance
The tunnel marks the way into a branded zone, so every visitor crosses a lit threshold first.
Key features
Typical uses
| Type | Motion-triggered walk-through tunnel with laser curtain |
|---|---|
| Structure | 1,200 mm long, 560 mm wide, 2,152 mm high as listed |
| Tubes | LED tubes 1,000 mm long, resolution 64 per tube |
| Connectivity | LAN for data and lighting; ILDA and DMX for the laser |
| Interaction | Interactive, triggered by motion at the entrance |
| Mounting | Floor-mounted, on a levelled floor |
| Environment | Indoor use, away from direct sun and glare |
| Power and setup time | One 16 amp single-phase feed near 3.68 kW; usually ready within six hours |
These are the live specification's figures. Tunnel length, laser layout and sequence content are agreed at the site survey.
Delivered at
On two stands at ADNEC, floor sensors and LiDAR picked up visitors and drove LED content in reply. It did not use the tunnel, but the sensing chain is the same idea.
Our volumetric LED build gave du's Powered by Human theme a floating, hologram-like form. It is our record of shaping light into a space people walk around.
Lazulite delivered technology for a visitor route through Dubai Municipality's GIS Experience Center. The tunnel follows the same thinking about how people arrive and move.
Light the tubes in flag colours and let each guest walk through a burst of red, green, white and black.
Learn moreRental includes the tunnel, tubes, laser and sensor kit, programming of one sequence set, transport, build, removal and an on-site technician.
A custom build can lengthen the tunnel, add a branded skin to the frame or fix it in a venue for a season.
The crew builds and tests the tunnel in four to six hours, often the day before doors open. We strike it within a few hours of the last guest.
Our technician watches the sensor, resets the sequence when needed and can stop the laser at once. The tunnel never runs without someone from our team nearby.
Lazulite opened in 2016. Tunnel crews now travel to all six GCC countries from our workshop in Dubai Production City.
Before each booking, the team tests every tube, aligns the laser and trials the sensor range.
Trusted by: Brands, Agencies, Exhibitors, Venues
We confirm the event, the entrance position, opening hours and how many guests will pass through.
Programmers build tube and curtain looks in your colours, then send a preview for approval.
We set laser heights and clear zones, then share the plan with the venue's safety team.
The crew builds the tunnel, tunes the sensor range and stays with it for every open hour.
After the event we dismantle the tunnel and keep your sequences on file for a future booking.
The live specification lists the structure at 1,200 by 560 mm and 2,152 mm high. Leave a clear approach in front so the sensor reads one arrival at a time.
Book one 16 amp single-phase point, rated near 3.68 kW. Plan a LAN run for lighting and data, plus ILDA or DMX for the laser. A 2.4 GHz network also appears on the spec sheet.
The tunnel needs a levelled floor so its frame stands true and the laser stays aligned. Our crew confirms the floor surface with the venue ahead of build day.
Each venue receives a written laser plan covering beam heights and keep-clear areas. Our technician holds the stop control while the tunnel is live. Keep strong spotlights and daylight off the entrance.
Event days, opening hours and sequence programming set most of the cost. A longer tunnel, branded skins and travel outside Dubai add to it.
A standard rental with your colours suits a single event. A custom build costs more at the start and pays back across repeat shows.
Bespoke sequences, frame wraps, extra rehearsal time and a second technician are quoted only when your brief needs them.
The bands below are indicative Lazulite estimates in AED, before VAT and venue charges.
Budget bands
Compact
One tunnel for one event day, about AED 8,000 to 15,000
Standard
A branded tunnel for a multi-day show, about AED 18,000 to 35,000
Flagship
A longer tunnel or extended run, about AED 40,000 to 75,000
Rent vs custom
| Metric | Rent | Custom build |
|---|---|---|
| Speed to launch | Higher | Lower |
| Upfront investment | Lower | Higher |
| Brand uniqueness | Lower | Higher |
| Reuse value | Lower | Higher |
Rent
A tested tunnel in your colours
Custom build
A tunnel shaped to your brand
The tunnel reacts to each guest who walks in, at body scale. Laser Projection is a truss rig that draws beams and logos above a room for everyone to watch.
Pick the tunnel when the moment is arrival, and each visitor should feel the light respond to them.
Pick the projection rig for a stage show, a logo drawn in the air or beams timed to music for a seated crowd.
Ask where the guests are. Moving through a doorway points to the tunnel, while gathered facing a stage points to projection.
Can't find your answer? Speak with our Dubai team.
A sensor at the entrance detects a guest walking up or stepping in. It tells the controller to start the laser curtain and the LED tube sequence at once. When the passage clears, the tunnel returns to its idle look and waits. Our technician watches each trigger throughout the event.
Let's build it together
Tell us your venue, the entrance you have in mind and your event dates. We will reply with a tunnel layout, a laser safety approach and an indicative budget.
Let's Discuss Your Project
