Engineers Who Build and Run the Pillar
The team that programmes your rotation sequence is the team on site, so no one learns the system on show day.
Rotating Cube · Dubai & GCC
Lazulite rents and builds the Rotating Cube, a 3,560 mm LED pillar made of four stacked cubes that turn on a vertical axis. Each cube carries four LED faces, so your video plays toward every side of a stand, lobby or atrium. Our engineers load the content, programme the turns and run the pillar until teardown.
Stand centrepiece
LED facesLobby featureQuick facts
A Rotating Cube is a floor-mounted LED display built from four stacked cubes with four screen faces each. Its rotating mechanism turns the cubes on a programmed sequence, so the pillar shows new faces in every direction.
10+
Rotating Cube Installations
6+
Lobbies and Stands Anchored
40+
Rotation Sequences Choreographed
30+
Wraparound Video Loops Produced
Each booking covers the pillar, rotation controller, media player and reinforced base, plus delivery, setup and teardown. One of our engineers runs the turns and video throughout.
Video reaches the LED faces over HDMI, while rotation commands travel over LAN. We time each turn to the content, so a fresh face swings into view as a new message begins.
Every face runs at 384 x 512 pixels, and four faces together form a 1,536 x 512 canvas.
Supply MP4 or MOV video, or let our designers build it. Play one message across every face, or give each side its own product, offer or language.
Choose a configuration
Exhibition Stand Centrepiece
At the centre of a stand, the pillar turns its faces toward every aisle, so movement shows from across the hall.
Key features
Typical uses
| Type | Rotating LED display pillar |
|---|---|
| Build | Four stacked cubes with four LED faces each |
| Size | 1,465 mm square footprint; 3,560 mm total height |
| Resolution | 384 x 512 pixels per face; 1,536 x 512 across four faces |
| Content | MP4 or MOV video over HDMI |
| Control | Rotation programmed over LAN; non-interactive |
| Power | 16 A single-phase supply, roughly 3.68 kW |
| Setup | Level floor on a reinforced MDF base; most rentals install in a day |
Final figures are checked against your stand plan and venue at the site survey.
Delivered at
Our own kinetic design: blocks turn on their axis to a programmed pattern, as the Rotating Cube does.
A shaped LED centrepiece for du's GITEX stand. It did not rotate, but shows how one LED feature anchors a stand.
Lazulite built this stand at ADNEC. It did not use the cube, but its open plan is the type of space a turning pillar anchors.
Rental covers the pillar, base, rotation control and media playback, plus an on-site engineer, delivery, setup and teardown. Hire it for one show day or several weeks.
Need one cube, a shorter stack or several pillars? Our engineers size the frame, faces and rotation together, then test the build in Dubai.
Most rentals arrive and install the day before opening, including a full rotation test. Teardown takes a few hours after the last visitor leaves.
The team that programmes your rotation sequence is the team on site, so no one learns the system on show day.
We have supported live events across the UAE and the GCC since 2016, including more than 100 exhibitions.
Rotation drives, LED faces and controllers are checked, and each sequence runs in full before dispatch.
Trusted by: Agencies, Brands, Event organisers, Exhibitors
We confirm the location, ceiling height, sight lines and power before any content is made.
Our designers prepare video to the face resolution and map it around each cube.
We programme every turn against the video and run the full sequence in our workshop.
Engineers level the base, raise the stack, connect power and data, then run the show.
We take the pillar down, pack it in cases and send you a short report.
The base is 1,465 mm square and the pillar stands 3,560 mm tall. As a square turns, its corners sweep a circle about 2.1 metres wide, so we plan a clear zone around it.
Book one 16 A single-phase supply of about 3.68 kW with the organiser. Content runs over HDMI, rotation runs over LAN, and a 2.4 GHz network link is required.
The pillar needs a level floor and stands on a reinforced MDF base. Venues receive our load data and drawings for sign-off, and busy stands get a barrier line.
The pillar travels as separate cubes and a base, then is stacked on site, so standard goods lifts usually work. We plan load-in slots for Dubai, Abu Dhabi, Riyadh and Doha.
Hire length, content scope and the rotation programme set the base price. Outdoor shading, extra crew hours or a second pillar add to it.
Renting the existing pillar keeps both cost and lead time down. A custom stack is a larger first spend, but it becomes a display you can bring back each season.
Video design for every face, multilingual versions, branded base wraps and longer hours are itemised in the quote. You choose only what the brief needs.
We quote the cube in three bands, from a single-event rental to a custom stack on tour. Share dates, venue and content plans, and expect a price range from us within one working day.
Budget bands
Compact
One pillar, supplied video
Standard
Custom content, rental hardware
Flagship
A stack built for you
Rent vs custom
| Metric | Rent | Custom build |
|---|---|---|
| Speed to launch | Higher | Lower |
| Upfront investment | Lower | Higher |
| Brand uniqueness | Lower | Higher |
| Reuse value | Lower | Higher |
Rent
Ready-made pillar, short lead time
Custom build
Sized to your space
The Rotating Cube moves, so it catches the eye from far across a hall. Our LED Cube stays still, uses a finer 1.2 mm pitch and responds to touch.
Choose the Rotating Cube for open stands, lobbies and atriums where people approach from a distance. Height and motion do the work before anyone reads a word.
Choose the LED Cube when visitors stand close and you want them to touch a face to start content. It also suits smaller stands.
Ask what the display must do first. If it must pull people in, pick motion. If it must hold them with detail, pick touch, or use both.
Stand structures planned with a clear zone for the turning cubes.
Can't find your answer? Speak with our Dubai team.
The standard pillar stands 3,560 mm tall on a base of 1,465 x 1,465 mm. It is built from four stacked cubes, each with four LED faces. Leave open floor around it, because the corners travel beyond the base as the cubes turn. We check ceiling height during the site survey.
Let's build it together
Tell us about your stand, lobby or launch, with the venue and dates. We will come back with a placement plan, content brief and budget range for the Rotating Cube. One team builds the sequence, installs the pillar and runs it, from one show day to a GCC tour. Reach us by form, phone or WhatsApp.
Let's Discuss Your Project
