A Laser Operator at Every Show
The operator who programmes your show runs it on the night, with a hand on the stop control throughout. A Lazulite laser rig is never left running unattended.
Laser Shows · Dubai & GCC
Lazulite rents the Laser Projection rig, a truss-mounted system whose laser projectors draw beams, patterns, logos and animations in real time. Shows run from a laser controller over ILDA or take cues from a lighting desk over DMX. Our operator programmes each show to your music and runs it live at indoor events across the GCC.
Beam show
LogoRigQuick facts
Laser projection steers coloured laser beams with fast-moving mirrors, so the light draws lines, shapes and text in haze or on a surface.
25+
Laser Shows Operated
400+
Cues Timed to Music
60+
Logos Drawn in Laser Light
18+
Galas and Launch Openings
Each package covers the truss frame, the laser projectors, control interfaces and show programming. Transport, rigging, aiming and teardown are included, and a Lazulite laser operator runs the show on the night.
Inside each projector, small mirrors on fast motors called galvanometer scanners swing the beam to trace a shape. A laser controller sends the show over ILDA, the standard link set by the International Laser Display Association. DMX lets the lighting desk fire laser cues alongside the stage lights.
The truss measures 2,000 by 293 by 3,293 mm and carries the projectors. Control runs over ILDA and DMX. Supported media are MP4 and MOV, and total resolution is Full HD, 1920 by 1080. The rig is non interactive, with no touch input, and is for indoor use only.
Plan the show around moments: a walk-in look, a logo, a reveal and a finale. Send your track and vector logo, and we build a cue list against the music. Simple outlines draw cleanly, while photos and gradients do not.
Choose a configuration
Beam Show Timed to Music
Beams, fans and sweeps programmed to a track, with every look landing on a beat.
Key features
Typical uses
| Type | Truss-mounted laser projection system |
|---|---|
| Structure | Truss frame 2 m wide, 293 mm deep and 3.29 m high |
| Control | ILDA and DMX |
| Media | MP4 or MOV |
| Resolution | Full HD, 1920 by 1080 in total |
| Interaction | Non interactive, non touch |
| Supply | Rent or custom build |
| Power and setup time | 16 amp feeds; rigged in about half a day |
Figures describe the standard rig. Feed count, rig position and the laser safety plan are confirmed at the site survey.
Delivered at
Our volumetric LED display turned du's Powered by Human theme into an image that seemed to float like a hologram. It used LED, not lasers, yet it is our nearest record of light shaped into a show piece.
Helix is a Lazulite design of rotating blocks, customisable in size, shape and motion pattern. Like a laser show, it runs on programmed sequences.
Lazulite planned the technology and content on a compressed timeline, then supervised installation and live operation. A laser show follows the same plan, rehearse and operate method.
A rental includes the truss rig, laser projectors, control kit, transport, rigging, aiming and removal. A Lazulite operator runs every show, and programming is quoted to your show length.
A custom build can add projectors, change the truss finish or fix the rig in a venue for a season.
The rig goes up and is aimed in about half a day, then rehearses in the dark. We strike it within hours of the final cue.
The operator who programmes your show runs it on the night, with a hand on the stop control throughout. A Lazulite laser rig is never left running unattended.
Since 2016, Lazulite crews have run event technology in every Gulf state, working out of Dubai Production City.
Every projector is cleaned, aligned and tested before it leaves, so faults surface on the bench, not in the ballroom.
Trusted by: Agencies, Brands, Event Organisers, Venues
We agree the moments, the track and the room, then check ceiling height, haze rules and power.
Designers trace your logo and build each look against the music, cue by cue.
We set beam heights and no-go zones, then share the plan and haze request with the venue.
Our crew rigs the truss, aims every projector and rehearses the full show in the dark.
The operator runs the show on cue, and the crew strikes the rig after guests leave.
The rig stands on a 2,000 by 293 mm truss, 3,293 mm tall, which needs truss support. We place it beside or behind the stage with a clear zone around it.
Plan 16 amp single-phase feeds, each close to 3.68 kW; the quote states how many your show needs. Plan cable routes for ILDA and DMX, and note the 2.4 GHz network in the requirements.
IEC 60825-1 sorts lasers into classes from 1 to 4. Show lasers bright enough for beams usually sit in Class 3B or Class 4. Nordic radiation safety authorities advise against scanning audiences with them, so our designs keep beams above head height and away from guests.
Beams only show in the air where haze scatters the light. Haze can set off optical smoke detectors, so we agree its use with the venue's fire and safety team well before show day. Keep spotlights and bright lighting away from the projection zone.
Rigs, show nights and programming time set the price. Logo animation, extra rehearsals and travel outside Dubai add to it.
Renting the standard rig costs less and suits one-off events. A custom or fixed rig costs more upfront but serves a season of shows.
Music-timed programming, logo tracing, bilingual text and haze machines are quoted when your show needs them.
All three bands are indicative estimates in AED, excluding VAT and venue fees. Every show is quoted to its own brief, usually within a working day.
Budget bands
Compact
One rig for one evening, about AED 6,000 to 12,000
Standard
A show programmed to your music, about AED 15,000 to 30,000
Flagship
Several rigs or several nights, about AED 35,000 to 70,000
Rent vs custom
| Metric | Rent | Custom build |
|---|---|---|
| Speed to launch | Higher | Lower |
| Upfront investment | Lower | Higher |
| Brand uniqueness | Lower | Higher |
| Reuse value | Lower | Higher |
Rent
A tested rig, ready for your night
Custom build
A rig made for your venue
Laser projection draws lines and beams of pure colour, in the air or on a surface. Projection mapping fills a facade, car or set with full video, warped to fit its shape.
Choose lasers for energy, beams over a crowd and logos in outline, in a dark room with no large surface to light.
Choose mapping when the story needs detailed video, photos or product imagery fitted to a building, a car or a stage set.
Start with the surface. No surface and a dark room suit lasers, while a defined object or wall suits mapping.
Can't find your answer? Speak with our Dubai team.
Laser projection uses coloured laser beams steered by fast mirrors to draw lines, patterns, text and logos in real time. Lazulite's rig mounts its laser projectors on a 3.3 m truss frame. An operator runs the show over ILDA or cues it from a lighting desk over DMX.
Let's build it together
Tell us your event, venue and the moments to mark. We will send a show outline, a safety plan and an indicative budget.
Let's Discuss Your Project
