An Operator at the Arm All Night
The person who programmes your move also runs it. They watch the guest mark, start each take and keep a hand near the emergency stop.

Robotic Camera Booths · Dubai & GCC
The Glambot is a robotic camera arm that films guests in cinematic slow motion. A KUKA KR16 industrial arm swings the camera toward each guest as they pose on their mark. Our operator starts every take from an iPad and stays with the arm all night.
Arrival take
Operator view
Full setQuick facts
A Glambot is a camera mounted on a programmable robot arm. The arm moves the camera through a fast, repeatable path while it records, and the footage plays back slowed down. Lazulite's set pairs a KUKA KR16 arm with a control cabinet and an iPad app.
25+
Red Carpet Events Filmed
9,000+
Slow Motion Guest Clips
60+
Branded Clip Endings Designed
12+
GCC Venues Hosting the Arm
You get the arm, cabinet, iPad, camera rig, base, transport, setup and removal. An operator runs the takes and a technician handles the clips.
The KUKA KR16 is an industrial robot that repeats the same path to the millimetre. Cables from the cabinet carry each command to the arm. The operator chooses a move on the iPad, then taps to roll.
The outer frame measures 1,530 by 1,404 mm and rises to 2,348 mm. The arm alone is 1,382 by 505 by 1,475 mm. Send your logo and colours for the clip ending.
Each move sets where the camera starts, how fast it travels and where it stops. We match it to your carpet and add your logo frame.
Choose a configuration

Red Carpet Arrival Take
Guests step onto a marked spot, strike a pose and the arm sweeps in. Each arrival leaves with a short cinematic clip.
Key features
Typical uses
| Type | Floor-mounted robotic camera arm for slow-motion video |
|---|---|
| Robot | KUKA KR16 industrial arm with control cabinet |
| Control | iOS app on an iPad, interactive by touch |
| Connection | Wired link from control cabinet to arm |
| Outer size | 1,530 by 1,404 by 2,348 mm |
| Cabinet size | 1,018 by 818 by 1,059 mm |
| Base | Levelled floor base with reinforced MDF |
| Power and setup time | Three-phase 32 amp near 22.08 kW; most sets run within one day of arrival |
These are the standard set's figures. The move, the guarded zone and the clip delivery method are fixed during planning.
Delivered at
For Kohler's awards night presence, our team ran a mirrored Kaleidoscope booth where guests filmed branded clips. It was a different unit, but the same award night video brief.

A mirrored pyramid recorded short video clips of guests in Kohler's brand setting. Our record shows no robot arm, yet the clip output matches the Glambot's.

Festival visitors posed against custom backdrops and left with their photos the same minute. It shows our crew running a fast guest queue.

Film each winner holding the trophy as they leave the stage, ready for the after-party screens.
Learn moreA standard rental covers the arm, cabinet, iPad, base build, a set camera move, your logo ending, transport and two crew for each event day.
A custom move changes the camera path, speed and finish point to suit your carpet, product or stage. We can also build the backdrop and guest mark in your brand.
The crew arrives the day before or that morning to lay the MDF base and level the arm. Removal starts after the last take.
The person who programmes your move also runs it. They watch the guest mark, start each take and keep a hand near the emergency stop.
Lazulite has worked on events since 2016 from Dubai Production City. Our crews travel to all six GCC states with their own kit.
Before dispatch, the set runs the planned move in our Dubai workshop. A backup iPad travels with it.

Trusted by: Event Agencies, Brands, Award Organisers, Sponsors












We confirm the event, guest numbers, the carpet layout and the three-phase feed.
Our operator plans the camera path, and our designers build the branded closing frame for sign-off.
The full move runs in our workshop, and we test the stop and barrier plan.
On site we lay the base, level the arm, film test takes and run the carpet all night.
After the final take we remove the set and hand over the full clip library as agreed.
The frame and cabinet sit side by side on the base. Add the guest mark and a barrier line outside the arm's reach. We draw the zone into your floor plan.
The set draws three-phase 32 amp power, about 22.08 kW. A 2.4 GHz network appears on the spec sheet too. Some ballrooms need a temporary feed, so order power early.
The live specification calls for a levelled floor base with reinforced MDF. We check carpet, stage decks and lawns with the venue before build day.
Light the guest mark evenly so slowed footage stays clean. We agree load-in, door widths and lifts for the crated arm.
Hours, days, move design and clip branding drive the figure. A temporary power feed or travel beyond the UAE raises it.
A standard move with your logo ending typically costs less and books sooner. A custom path needs programming and testing time, so it costs more.
A branded backdrop, guest mark, closing frame and a clip sharing setup are separate lines. You pay only for the ones your event uses.
These bands are Lazulite estimates for planning. We found no published Gulf rate for robotic camera arms. Venue power, internet and VAT sit outside them.
Budget bands
Compact
One evening, standard move, indicative AED 15,000 to 25,000
Standard
Branded set over a few days, indicative AED 25,000 to 45,000
Flagship
Custom move or long run, indicative AED 45,000 to 80,000
Rent vs custom
| Metric | Rent | Custom build |
|---|---|---|
| Speed to launch | Higher | Lower |
| Upfront investment | Lower | Higher |
| Brand uniqueness | Lower | Higher |
| Reuse value | Lower | Higher |
Rent
The arm with a proven move
Custom build
A move made for your carpet
The Glambot moves a camera on an industrial arm toward a standing guest, so each clip feels like a film shot. A 360 Photobooth spins a camera around a guest on a platform. The arm needs three-phase power and a built base.
Pick the arm for a red carpet, premiere or gala where one polished arrival clip per guest matters.
Pick the 360 booth for a long party queue, groups on one platform or a venue with only single-phase power.
Check the power first. No three-phase feed points to the 360 booth, while a formal carpet with three-phase power suits the Glambot.

Blooming flowers move behind each guest as the arm films the arrival.

A selfie mirror inside the venue gives guests a printed photo after their clip.
Can't find your answer? Speak with our Dubai team.
A guest stands on a floor mark facing the camera. Our operator taps the iPad, and the KUKA KR16 arm moves the camera along a set path while it records. The footage plays back slowed down, giving a short cinematic clip of the guest that is ready to share.
Let's build it together
Tell us about your carpet, guest list and date. We will reply with a move plan, a floor layout and an indicative budget. The operator who tests your move in our workshop runs it on the night. Reach us by phone, WhatsApp or the form.
Let's Discuss Your Project