An Operator Who Watches the Floor
Our operator checks the flow and the landing area all evening, and pauses the tree if the floor needs attention.

Bubble Installations · Dubai & GCC
Lazulite rents the Bubble Tree, a floor-standing sculpture whose curved branches release a steady flow of white bubbles into the air around it. At about 4.2 metres across and 3.8 metres high, one tree holds the middle of a foyer, ballroom or mall atrium. Our crew sets it up, plans the floor around it and runs it through your event.
Ballroom foyer
Branch detail
Atrium viewQuick facts
A bubble tree is a decorative installation shaped like a tree. Bubbles leave outlets along its curved branches and float out over the space, while soft lighting picks them out in darker rooms.
12+
Gala Reveals Under Drifting Bubbles
6+
Wedding First Dances
8+
Mall Atrium Weekends Hosted
25+
Floor Plans Drawn With a Drop Zone
You get the tree, its floor base, bubble fluid, transport, assembly and removal. An operator watches the flow, the fluid level and the floor while guests are in the room.
Bubbles leave the tips of several curved branches and spread outwards as they fall. The live specification lists a continuous flow, so the effect stays on while the room fills. Soft lighting on the structure helps the bubbles show against a dim ceiling.
On the live sheet, the tree is 4,159 mm in diameter and 3,775 mm tall, floor mounted. Underneath sits a level base of reinforced MDF, and power comes from one single-phase 16 amp feed. The unit is listed as non-interactive, with single colour white bubbles.
Our workshop is still confirming three details: what makes the bubbles white, the fluid type and the run time per fill. Each answer goes in your quote.
Choose a configuration

Gala Foyer Centrepiece
The tree stands in a reception hall or pre-function space while guests arrive and mingle.
Key features
Typical uses
| Type | Floor-mounted bubble installation shaped like a tree |
|---|---|
| Size | 4,159 mm diameter, 3,775 mm high |
| Effect | Continuous white bubbles from curved branches, with soft lighting |
| Interaction | None |
| Power | Single-phase 16 A listed; real draw to be confirmed |
| Floor | Levelled base with reinforced MDF |
| Environment | Indoor, or outdoor under shade and weather cover |
| Fluid, run time and setup | Confirmed in your quote; setup usually within a day |
Size and power come from the live specification. Fluid type, refill timing and drop zone size are agreed for each venue.
Delivered at

Guests recorded short videos in a mirrored pyramid booth and kept them. No bubble tree was used, but the tree plays the same posing role.
Award guests filmed themselves among mirrored reflections of branded visuals. No bubbles were involved, yet that evening is the kind a foyer tree is booked for.

Children and parents watched animals appear around a virtual safari ride. Bubbles had no role there, yet young families are the audience a mall tree draws.

The tree runs in the foyer, and guests walk through falling bubbles on the way to their tables.
Learn moreA show day covers the tree, base, fluid, operator, delivery, assembly, floor protection and removal after the last guest leaves.
Across a placement of several weeks, our team sets opening hours, refills and cleaning with your operations staff, then visits on a fixed rota.
Most trees go up in a morning, then run a test flow before doors. Strike and a final floor clean follow the event.
Our operator checks the flow and the landing area all evening, and pauses the tree if the floor needs attention.
Our base is in Dubai Production City. Gulf crews have run our events in every GCC state since 2016.
Before dispatch, each tree runs with fluid in our Dubai workshop, so blocked outlets are cleared first.

Trusted by: Hotels, Malls, Wedding Planners, Agencies












We confirm the venue, the event timings and when guests should first see the bubbles.
We draw the tree position, the landing area and any mats on your floor plan.
Our workshop fills the tree, runs it and checks every branch outlet.
The crew lays the base, raises the tree, connects power and starts the bubbles.
We dismantle the tree, clean the landing area and hand the space back.
The tree needs a circle about 4.2 metres wide and headroom above 3.8 metres. We confirm the extra clearance at the site visit.
Power on the sheet is one single-phase line at 16 amps. The real load is still being confirmed, and so is the listed 2.4 GHz network line.
Bubbles land as they burst, so the floor around the tree can become wet. We keep the drop zone off stairs, dance floors and bars, lay mats where guests walk and wipe between sessions.
Our operator refills from a hidden point behind the tree. The fluid type and refill timing are confirmed in your quote.
Show days, run hours and floor care set most of the cost. Outdoor shade checks, long seasons and travel add to it.
A single evening carries the full assembly cost. A multi-week placement spreads that cost across more days.
Extra mats, a second operator and out-of-hours assembly are added only when your plan needs them.
These are Lazulite estimates in AED before VAT, awaiting finance approval.
Budget bands
Compact
One tree, one show day, about AED 7,000 to 13,000
Standard
A gala week or launch weekend, about AED 16,000 to 32,000
Flagship
A mall or hotel season, about AED 36,000 to 75,000
Rent vs custom
| Metric | Rent | Custom build |
|---|---|---|
| Speed to launch | Higher | Lower |
| Upfront investment | Lower | Higher |
| Brand uniqueness | Lower | Higher |
| Reuse value | Lower | Higher |
Rent
The tree for your event
Custom build
A placement planned for your venue
The tree is a 4.2 metre piece that guests see as decor in its own right. Compact bubble machines sit out of sight on a stage edge or truss, and only the bubbles show.
Choose the tree when the room needs a visible centrepiece in a foyer, atrium or courtyard.
Small machines suit a short burst on a stage or dance floor, where no floor space is free.
Check whether you can give up a circle over four metres wide, plus landing room.

Flameless torches guide guests in towards the tree in the foyer.

Your logo falls in water on stage after the bubble welcome outside.
Can't find your answer? Speak with our Dubai team.
A bubble tree is a floor-standing sculpture shaped like a tree that releases bubbles from its curved branches. Lazulite's unit stands about 4.2 metres wide and 3.8 metres high. It runs a continuous flow of white bubbles with soft lighting, and it needs no screen content or guest input.
Let's build it together
Send your venue, the event timings and the moment you want the bubbles to start. We reply with a tree position, a drop zone plan and an estimated budget. The operator who sets up the tree stays with it until the room is empty.
Let's Discuss Your Project